1. Ruthenium-titanium anode plates&sheets
High current efficiency (chlorine or oxygen analysis environment), excellent corrosion resistance, long service life of the electrode, the specification and size of the electrode can be designed according to user demand, the electrode matrix can be reused for many times, and no pollution to the medium is generated.
Chlor-alkali industry, sodium hypochlorite industry, sewage treatment industry, freshwater disinfection.
2. Ruthenium-iridium titanium anode plates& sheets
The size of anode is stable and the distance between electrodes does not change during electrolysis. Low operating voltage, small power consumption, can reduce consumption about 20%. Titanium anode has a long working life. Metal anode is resistant to chlorine and alkali corrosion in the chlorine gas industry produced by diaphragm process. It can overcome the problem of graphite anode and lead anode dissolution, avoid the contamination of electrolyte and cathode products, and improve the quality of products. Increase current density.
For example, in the production of chlor-alkali by diaphragm method, the current density of graphite electrode is 8A/M2; , titanium anode can be doubled up to 17A/M2; Thus the output can be doubled in an electrolytic plant with the same electrolytic cells. Strong corrosion resistance, can work in a number of corrosive strong, special requirements of the electrolytic medium. It can avoid short circuit problem after lead anode deform, thus improve current efficiency. Matrix titanium can be used repeatedly.
Chlor-alkali industry, chlorine dioxide production, chlorate industry, hypochlorite industry, perchlorate production, hospital sewage treatment, persulfate production, food appliance disinfection, ionized water production
3. Tantalum iridium titanium anode plates& sheets
In sulfuric acid solution, the metal is extracted by electrolysis, and oxygen is separated from the anode. The titanium electrode coated with tantalum iridium was used to avoid corrosion by electrolyte. The iridium oxide coating shows excellent electrolytic persistence. The initial anode potential was 1.51V, which was 1.64V after 6000 hours, and the coating weight loss was 0mg/M2
Lead based alloy electrodes (sb6%-15% or ag1%) are used in electrolysis production. Lead anode dissolves, consumes anode materials, and affects anode life. Moreover, lead dissolved in solution can be precipitated on the cathode, increasing lead impurity in the metal and reducing product quality.
Ruthenium - based coatings can be severely damaged in this condition and should not be used. Initial anode potential is 1.48V, 1000 hours later, rising to 2.0V, the anode has been passivated.
Electrolytic production of non-ferrous metals, disinfection of food appliances, production of electrolytic silver catalyst, dyeing and finishing waste water treatment in wool mill, electrolytic manufacturing of copper foil, galvanized steel plate, chrome plating, electrolytic oxidation recovery of mercury, rhodium plating, palladium plating, gold plating, electrolysis, salt melting, battery production, cathode protection, ionized water production, printed circuit board.
4. Iridium tin titanium anode plates & sheets
High current efficiency (in chlorine or oxygen analysis environment), excellent corrosion resistance, long service life of the electrode, the specification and size of the electrode can be designed according to user demand, and the electrode matrix can be reused for many times without pollution to the medium.
Chlor-alkali industry, aluminum foil, copper foil industry, industrial sewage treatment, ionic water production, organic electrochemical treatment and organic electrochemical synthesis, electrolytic purification treatment of gas, desalination of marine, oxidant regeneration cycle.
Xi'an Ocean Trading Co., Ltd ,your reliable titanium expert and technical consultant.
For related product details, please refer to http://www.ti-mart.com/products/Titanium-Plates-and-Sheets.html