Industrial titanium for the panel, aluminum alloy for the back plate, polyethylene material for the core composite plate and made of Titanium clad steel sheets/plates and . ti-plastic clad plate not only reduces the cost, the surface layer and has the excellent performance of titanium material, but also improves the tensile stiffness and surface smoothness of the plate.Titanium clad steel sheets/plates and Ti-plastic clad plate is mainly used in the roof and curtain wall system of high-grade buildings and other places that have higher requirements on the strength and corrosion resistance of plate. Titanium is precious metal.
Titanium-zinc clad plate is a new type of high-grade aluminum-plastic board building material made of titanium-zinc alloy plate, 3003H26 (H24) aluminum plate as backing plate and high-pressure low-density polyethylene (LDPE) as core material., it combines the characteristics of Titanium zinc plate (metal texture, surface repair function, long service life, good plasticity, etc.) and compound plate is flat and level, the advantage of high flexural performance at an organic whole, is the model of combination of classical art and modern technology. In use initial stage, far view is natural brand-new blue-gray, close look presents the simple simple sense that gives natural metal. With the passage of time, the surface of titanium and zinc plate exposed to the atmosphere will gradually form a layer of dense and hard zinc carbonate anticorrosion layer to prevent further corrosion of the plate surface, even if there are scratches and defects in this evolutionary process completely disappeared. For those buildings that need to create a strong sense of nature, it is undoubtedly an ideal decoration material, especially suitable for the environment with strong natural and historical atmosphere, which can add unique charm to modern architecture and classical architecture. It has good strength and rigidity and can withstand strong wind and other harsh weather environment. Good plasticity, easy to process and install, conducive to three-dimensional modeling, able to adapt to diverse layout requirements, can fully publicize the architect's personality, to meet its rich creative imagination and inspiration requirements.
Standard size: thickness: 4mm; 5 mm; 6 mm; Width: 1000mm; 1240 mm; 630mm
Titanium Plates & Sheets thickness < 0.3mm) length: 2000mm; 2440 mm; 3000 mm; 6000 mm
Features of ti-plastic clad plate and Titanium clad steel sheets/plates.
(1) Strong corrosion resistance, whether in industrial areas, heavily polluted urban areas, rural areas, or coastal areas, after several years, the titanium surface does not change color.
(2) Good mechanical properties. The tensile strength of industrial pure titanium is higher than that of ordinary carbon structural steel.
(3)It has good resistance to epidemic disease and creep.
(4) Without magnetization effect, the resistivity and thermal conductivity of industrial pure titanium are similar to that of stainless steel.
(5) Industrial pure titanium is a self-sustaining metal, and surface scratches can heal automatically.
(6)Industrial pure titanium is used to compound under annealing state and has good machinability (similar to stainless steel).
(7)The density of industrial Titanium Plates & Sheets is 4.5x103kg /m3, 1.7 times that of aluminum and 60% that of steel. Good plasticity, elongation greater than or equal to 30%.
Features of titanium zinc clad plate and Titanium clad steel sheets/plates.
(1) Long service life. Titanium zinc alloy plate surface can naturally form a layer of dense oxide layer (zinc carbonate salt), to prevent further corrosion, can be used in poor atmospheric conditions.
(2) The plate does not need coating or other anticorrosive treatment and has a metallic texture.
(3) The plate has the function of self-repair and automatically heals without leaving any trace after the scratch.
(4) Large rigidity, not easy to bend.
(5) The plate surface is smooth with good decorative effect.
(6) Iit has certain sound insulation, heat insulation and energy saving functions.
(7) The plate color can be pretreated into blue gray, black gray, copper green, etc., in addition to the original metal color.
(8) Easy to process and shape. Can be processed in the factory molding, but also in the construction site while processing and installation, conducive to shorten the construction period.
(9) Good environmental coordination. Low reflectivity, no light pollution; 100% recyclable